The table below lists the available eCosPro architecture, CPU and board ports, and their supported hardware features. eCosPro Developer's Kits for the below boards are generally available for immediate purchase.

Ports to customer hardware or alternative development boards, along with any specific driver and/or feature requirements can be delivered as part of a custom eCosPro release.

<< Expand table

Parameterized CPU & Board Support Table - click on headings to sort, hover on headings or tick's for more info

Arch	CPU	Board	Doc	Debug	USB	Net	Serial	Flash	SD	SPI	I2C	WDT	RTC	Other	Notes
Arch	CPU	Board	Doc	Debug	USB	Net	Serial	Flash	SD	SPI	I2C	WDT	RTC	Other	Notes
ARM Aarch32 Virtual Machine	QEMU System Arm	QEMU x86-64		QEMU, RedBoot		BSD, lwIP, IPv6									VirtIO, RPMSG and macrocell based IO. SMP to 8 cores.ENQUIRE FOR AVAILABILITY
ARM Cortex-A5	Atmel SAMA5D3x	Atmel SAMA5D31-EK, SAMA5D36-EK		J-Link or direct JTAG, RedBoot	host & device	BSD, lwIP, IPv6		NOR						FPU, GPIO, 10/100 and GBit Eth, CAN	BootUp support for Atmel Secure Boot. Compatible with both Ronetix and Embest CPU module variants. The USB and CAN driver packages require add-on middleware licenses.
ARM Cortex-A5	Atmel SAMA5D3x	Atmel SAMA5D3-Xplained		JTAG, RedBoot	host & device	BSD, lwIP, IPv6		NAND						FPU, GPIO, 10/100 and GBit Eth, CAN	RedBoot built with NAND and Yaffs file system support. The CAN driver, USB and Yaffs packages require add-on middleware licenses.
ARM Cortex-A53	Broadcom BCM2837	Raspberry Pi 3 and Compute Module 3		JTAG, RedBoot	host & device	BSD, lwIP, IPv6								SMP, FPU, GPIO, WiFi	Free for non-commercial use. Compute Module IO Board V3 support includes eMMC. Pi 3 wireless network support has been tested against the RPi3B (Raspberry Pi 3 Model B V1.2) & RPi3B+ (Raspberry Pi 3 Model B+ 2017).
ARM Cortex-A7	Broadcom BCM2836	Raspberry Pi 2		JTAG, RedBoot	host & device	BSD, lwIP, IPv6								SMP, FPU, GPIO	Free for non-commercial use
ARM Cortex-A9	Intel Cyclone V HPS	Intel Cyclone V SoC Development Kit (DK-DEV-5CSXC6N/ES)		JTAG, RedBoot		BSD, lwIP, IPv6		QSPI flash						GPIO	QSPI is dedicated to serial flash support. SMP and FPU supported in v4.0 and later. MMC/MicroSD slot does not have a card-detect (media change) signal
ARM Cortex-A9	Broadcom	Broadcom BCM956150K SVK reference board (BCM56150)		JTAG, RedBoot				QSPI flash
ARM Cortex-A9	Intel Arria 10 SX HPS	Dream Chip Arria 10 SoM & Eval Baseboard (DCT10ABASE)		JTAG, RedBoot		BSD, lwIP, IPv6		QSPI flash						GPIO	Utilises "Golden Hardware Reference Design" (GHRD) as default FPGA configuration with associated mappings, SMP, quad-ethernet interfaces supported for BSD based stack.
ARM Cortex-M3	NXP LPC17xx: LPC1768, LPC1758	Keil MCB1700 Evaluation Board		JTAG, gdbstubs		lwIP, IPv6		NOR
ARM Cortex-M3	Luminary Micro/TI Stellaris LM3Sxxxx:LM3S8962	LM3S8962 Evaluation Board		JTAG, gdbstubs		lwIP, IPv6		NOR						GPIO
ARM Cortex-M3	ST STM32 F1: STM32F103RB	ST STM3210B-EVAL evaluation board		JTAG				NOR						ADC, GPIO	ENQUIRE FOR AVAILABILITY
ARM Cortex-M3	ST STM32 F1: STM32F107VCT	ST STM3210C-EVAL evaluation board		JTAG, gdbstubs		lwIP, IPv6		NOR						ADC, GPIO
ARM Cortex-M3	ST STM32 F1: STM32F103ZE	ST STM3210E-EVAL evaluation board		JTAG, RedBoot				NOR, NAND						ADC, GPIO, CAN	The CAN driver package requires an add-on middleware license.
ARM Cortex-M3	ST STM32 F2: STM32F207IGH6	ST STM3220G-EVAL evaluation board		ST-Link and direct JTAG, RedBoot	host & device	lwIP, IPv6		NOR						ADC, GPIO, CAN	Supports both USB HS and FS controllers. The USB and CAN driver packages require add-on middleware licenses.
ARM Cortex-M4	Atmel SAM4E: SAM4E16	Atmel SAM4E-EK Evaluation Kit		JTAG, gdbstubs		BSD, lwIP, IPv6		NOR						ADC, GPIO, CAN	The CAN driver package requires an add-on middleware license.
ARM Cortex-M4	Cypress BCM43362 WICED	BCM943362WCD4 Evaluation and Development Kit		JTAG		lwIP, IPv6		NOR						GPIO	WICED WiFi integrated with eCosPro lwIP. ENQUIRE FOR AVAILABILITY
ARM Cortex-M4	Cypress BCM43364 WICED	BCM943364WCD1 Evaluation and Development Kit		JTAG		lwIP, IPv6		NOR						GPIO	WICED WiFi integrated with eCosPro lwIP. ENQUIRE FOR AVAILABILITY
ARM Cortex-M4	NXP Kinetis K60: MK60DN512VMD10, MK60DN512VMD10, MK60FN1M0VLQ12	TWR-K60N512 / TWR-K60D100M / TWR-K60F120M Tower System Modules		OSBDM JTAG, RedBoot		BSD, lwIP, IPv6		NOR						GPIO	Requires TWR-SER board to support serial and ethernet features.
ARM Cortex-M4	NXP Kinetis K70: MK70FN1M0VMJ12	TWR-K70F120M Tower System Module		OSBDM JTAG, RedBoot		BSD, lwIP, IPv6		NOR						GPIO	Requires TWR-SER board to support serial and ethernet features.
ARM Cortex-M4	ST STM32 L4: STM32L476RG	ST 32L476GDISCOVERY evaluation board		ST-Link and direct JTAG, RedBoot				NOR, QSPI flash						ADC, GPIO	QSPI is dedicated to serial flash support. BootUp boot firmware with in-field system update functionality.
ARM Cortex-M4	ST STM32 L4+: STM32L4R9AII6	ST 32L4R9IDISCOVERY evaluation board		ST-Link and direct JTAG, RedBoot				NOR, Octo SPI flash						ADC, GPIO	OCTOSPI is dedicated to serial flash support, can operate in 1/4/8 bit mode. BootUp boot firmware with in-field system update functionality.
ARM Cortex-M4	ST STM32 F4: STM32F407IGH6	ST STM3240G-EVAL evaluation board		ST-Link and direct JTAG, RedBoot	host & device	lwIP, IPv6		NOR						ADC, GPIO, CAN	Supports both USB HS and FS controllers. The USB and CAN driver packages require add-on middleware licenses.
ARM Cortex-M4	ST STM32 F4: STM32F417IGH6	ST STM3241G-EVAL evaluation board		ST-Link and direct JTAG, RedBoot	host & device	lwIP, IPv6		NOR						ADC, GPIO, CAN	Supports both USB HS and FS controllers. The USB and CAN driver packages require add-on middleware licenses. Does not include support for STM32F41x family specific crypto acceleration hardware.
ARM Cortex-M4	ST STM32 F4: STM32F407VGT6	STM32 Discovery Kit - STM32F4DISCOVERY		ST-Link JTAG, gdbstubs	host & device	lwIP, IPv6		NOR						ADC, GPIO	Includes support for the DM-STF4BB Discovery Base board - which provides connectors for Ethernet, RS232 and SDHC. Supports both USB HS and FS controllers. The USB package requires an add-on middleware license.
ARM Cortex-M4	ST STM32 F4: ST32F429ZIT6U	Discovery Kit for STM32F429/439 lines - STM32F429IDISCOVERY		ST-Link JTAG, gdbstubs	host & device			NOR						ADC, GPIO	Supports both USB HS and FS controllers. The USB package requires an add-on middleware license.
ARM Cortex-M4	ST STM32 F4: STM32F429NIH6	Evaluation board for STM32F429 - STM32429I-EVAL		ST-Link JTAG, gdbstubs	host & device	BSD, lwIP, IPv6		NOR						GPIO, CAN	Supports both USB HS and FS controllers. The USB and CAN driver packages require add-on middleware licenses. BootUp boot firmware with in-field system update functionality.
ARM Cortex-M7	Microchip SAME70: ATSAME70Q21	Smart SAM E70 Xplained Evaluation Kit - ATSAME70-XPLD		EDBG, JTAG				NOR						CAN FD, ADC, CAN	CAN FD and CAN driver packages require add-on middleware licenses. No on-board transceiver, uses Arduino connectors. Atmel SAM S70 untested.
ARM Cortex-M7	Microchip SAMV71: ATSAMV71Q21	SAM V71 Xplained Ultra evaluation Kkit - ATSAMV71-XULT		EDBG, JTAG				NOR, QSPI						CAN FD, ADC, CAN	CAN FD and CAN driver packages require add-on middleware licenses.
ARM Cortex-M7	ST STM32 F7: STM32F746NGH6	Evaluation board for STM32F746 - STM32746G-EVAL2		ST-Link JTAG, gdbstubs	host & device	BSD, lwIP, IPv6		NOR						ADC, GPIO, CAN	Support for both USB HS and FS controllers. The USB and CAN driver packages require add-on middleware licenses. BootUp boot firmware with in-field system update functionality.
ARM Cortex-M7	NXP i.MX RT1050 crossover CPU: MIMXRT1052DVL6A	MIMXRT1050-EVKB: i.MX RT1050 Evaluation Kit		CMSIS-DAP, JTAG, RedBoot	host & device	lwIP, IPv6		NOR, QSPI						PWM	QSPI serial flash access requires NXP documented board modification.
ARM Cortex-M7	NXP i.MX RT1064 crossover CPU: MIMXRT1064DVL6A	MIMXRT1064-EVK: i.MX RT1064 Evaluation Kit		CMSIS-DAP, JTAG, RedBoot	host & device	lwIP, IPv6		NOR, QSPI						PWM, CAN	The CAN driver package requires an add-on middleware license. Direct programming of on-chip FlexSPI2 to on-package/bootable Winbond flash via Ronetix PEEDI.
ARM Cortex-M7	ST STM32 F7: STM32F746NG	STM32F7 Discovery - 32F746GDISCOVERY		ST-Link JTAG	host & device	BSD, lwIP, IPv6		NOR						ADC,GPIO	Support for both USB HS and FS controllers. The USB package requires an add-on middleware license.
ARM Cortex-M7	ST STM32 H7: STM32H735IG	Discovery Kit for STM32H7 Value Lines - STM32H735-DK		ST-Link JTAG		lwIP, IPv6		NOR						ADC,GPIO
ARM Cortex-M7	ST STM32 H7: STM32H723ZG	STM32 Nucleo-144 Development Board for STM32H7 Value Lines - NUCLEO-H723ZG		ST-Link JTAG		lwIP, IPv6		NOR, QSPI						ADC,QSPI,OCTOSPI	QSPI at 66MHz with external flash via CN10
ARM11	Broadcom BCM2835	Raspberry Pi, Compute Module, Pi 0, Pi 0 Wireless		JTAG, RedBoot	host & device	BSD, lwIP, IPv6								FPU, GPIO, WiFi	Free for non-commercial use. Compute Module IO Board support includes eMMC. Wireless network support has been tested against the RPi0W (Raspberry Pi Zero W V1.1) platform.
ARM7	Atmel AT91: AT91R40008	Atmel AT91EB40A Evaluation Kit		JTAG, RedBoot				NOR							AT91MEC01 Memory Extension Card supported
ARM7	Atmel AT91: AT91R40807	Atmel AT91EB40 Evaluation Kit		JTAG, RedBoot				NOR							AT91MEC01 Memory Extension Card supported
ARM7	Atmel AT91: AT91M42800A	Atmel AT91EB42 Evaluation Kit		JTAG, RedBoot				NOR							AT91MEC01 Memory Extension Card supported
ARM7	Atmel AT91: AT91M55800A	Atmel AT91EB55 Evaluation Kit		JTAG, RedBoot				NOR, DataFlash							AT91MEC01 Memory Extension Card supported
ARM7	Atmel AT91: AT91M55800A	PHYTEC phyCORE ARM7/AT91M55800A SOM		JTAG, RedBoot				NOR							RedBoot only
ARM7	Atmel SAM7: AT91SAM7A2	Atmel AT91SAM7A2-EK Evaluation Kit		JTAG, RedBoot				NOR
ARM7	Atmel SAM7: AT91SAM7A3	Atmel AT91SAM7A3-EK Evaluation Kit		JTAG, RedBoot				NOR						CAN	The CAN driver package requires an add-on middleware license.
ARM7	Atmel SAM7: AT91SAM7SE256, AT91SAM7SE512	Atmel AT91SAM7SE-EK Evaluation Kit		JTAG, gdbstubs				NOR							ENQUIRE FOR AVAILABILITY
ARM7	Atmel SAM7: AT91SAM7S256, AT91SAM7S512	Atmel AT91SAM7S-EK Evaluation Kit		JTAG, gdbstubs				NOR
ARM7	Atmel SAM7: AT91SAM7X256, AT91SAM7X512	Atmel AT91SAM7X-EK Evaluation Kit		JTAG, gdbstubs		lwIP, IPv6		NOR, DataFlash							lwIP recommended due to limited memory
ARM7	NXP LPC2xxx: LPC2104, LPC2105, LPC2106, LPC2212, LPC2214, LPC2294	Ashling EVBA7 board		JTAG, RedBoot				NOR
ARM7	NXP LPC2xxx: LPC2106	IAR LPC2106 KickStart board		JTAG, gdb stubs, RedBoot				NOR							ecoflash support for writing flash images
ARM7	NXP LPC2xxx: LPC2148	Embedded Artists QuickStart Board on Prototype Board		JTAG, gdbstubs				NOR							ecoflash support for writing flash images
ARM7	NXP LPC2xxx: LPC2292, LPC2294	Phytec phyCORE-LPC2294 board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						CAN	The CAN driver package requires an add-on middleware license.
ARM7	NXP LPC2xxx: LPC2387	Keil MCB2387 Evaluation Board		JTAG, gdb stubs		lwIP, IPv6		NOR							lwIP only due to limited memory
ARM7	NXP LPC2xxx: LPC2468	Embedded Artists LPC2468-32 and LPC2468-16 OEM Boards on Base Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR, NAND
ARM7	ST STR7: STR710	ST STR710-EVAL board		JTAG, RedBoot				NOR						ADC	The CAN driver package requires an add-on middleware license.
ARM7	ST STR7: STR710	Trimble TM3000 Development Kit		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						ADC, GPIO, PPP over GSM	Free eCosPro Starter Kit available to TM3000 registered users
ARM7	Sharp LH7: LH77790A	ARM AEB-1 Evaluation Board		JTAG, RedBoot				NOR
ARM7	Samsung KS32: KS32C50100	ARM Evaluator7T (AEB-2)		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
ARM7	ARM7TDMI	ARM FPGA Integrator/CM7TDMI		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						PCI
ARM7	ARM7TDMI	ARM PID7T/EPI Dev7		JTAG, RedBoot				NOR
ARM9	ARM926EJS	ARM Versatile Platform		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
ARM9	ARM966E-S	ARM FPGA Integrator/CM966E-S		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						PCI
ARM9	Atmel AT91: AT91RM9200	Atmel AT91RM9200 Development Kit		JTAG, RedBoot		BSD, lwIP, IPv6		NOR, DataFlash
ARM9	Atmel AT91: AT91RM9200	Atmel AT91RM9200 Evaluation Kit		JTAG, RedBoot		BSD, lwIP, IPv6		NOR, DataFlash
ARM9	Atmel AT91: AT91RM9200	Cogent CSB337 single board computer		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						framebuffer	Cogent CSB900 LCD board required for framebuffer driver
ARM9	Atmel AT91: AT91RM9200	KwikByte KB9200, KB9201, KB9202B, KB9202C single board computers		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
ARM9	Atmel AT91: AT91RM9200	SSV DNP/9200 on DNP/EVA9 Evaluation Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
ARM9	Atmel SAM9: AT91SAM9260	Atmel AT91SAM9260-EK Evaluation Kit		JTAG, RedBoot	host	BSD, lwIP, IPv6		DataFlash, NAND							DataFlash based system bootstrap. NAND driver supports H/W ECC and Yaffs NAND file system. The USB and Yaffs packages require add-on middleware licenses.
ARM9	Atmel SAM9: AT91SAM9261	Atmel AT91SAM9261-EK Evaluation Kit		JTAG, RedBoot	host	BSD, lwIP		NOR, NAND							NAND driver supports H/W ECC and Yaffs NAND file system. The USB and Yaffs packages require add-on middleware licenses.
ARM9	Atmel SAM9: AT91SAM9263	Atmel AT91SAM9263-EK Evaluation Kit		JTAG, RedBoot	host	BSD, lwIP, IPv6		DataFlash, NAND							DataFlash based system bootstrap. NAND driver supports H/W ECC and Yaffs NAND file system. The USB and Yaffs packages require add-on middleware licenses.
ARM9	Atmel SAM9: AT91SAM9G20	Atmel AT91SAM9G20-EK Evaluation Kit		JTAG, RedBoot	host	BSD, lwIP, IPv6		DataFlash, NAND							The USB package requires an add-on middleware license.
ARM9	Atmel SAM9: AT91SAM9G45	Atmel AT91SAM9G45-EKES Evaluation Kit		RedBoot	host	BSD, lwIP, IPv6		DataFlash, NAND							The USB package requires an add-on middleware license.
ARM9	NXP i.MX25: i.MX253	IMX25PDK - i.MX25 Product Development Kit		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						ADC, framebuffer, GPIO
ARM9	NXP i.MXL: MC9328MX1, MC9328MXL	MX1ADS/M9328MXLADS Application Development System		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
ARM9	Samsung s3c24xxx: s3c2410x	s3c24xxx based boards		JTAG, RedBoot		BSD, lwIP, IPv6		NOR, NAND							Current h/w ports limited to private customer boards
ARM9	TI Integra OMAP L-1x: L-137	Spectrum Digital OMAP-L137/TMS320C6747 Floating Point Starter Kit		JTAG, RedBoot	host	BSD, lwIP, IPv6		NOR							The USB package requires an add-on middleware license.
ARM9	TI Integra OMAP L-1x: L-138	Zoom OMAP-L138 eXperimenter Kit		JTAG, RedBoot	host	BSD, lwIP, IPv6		NOR							SPI serial flash. RedBoot support for JFFS2 on flash and FATfs on SD cards. The USB package requires an add-on middleware license.
ARM9	TI Sitara AM180X: AM1808	Zoom Sitara AM1808 eXperimenter Kit		JTAG, RedBoot	host	BSD, lwIP, IPv6		NOR							Sitara is software compatible with above TI L138 processor. The USB package requires an add-on middleware license.
ARM XScale	Intel IOP3xx, IOP321/80321	Intel IQ80321 Evaluation Platform Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						PCI
ARM XScale	Intel IXP4xx: IXP425	Intel XScale IXDP425 Network Processor Evaluation Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						PCI, GPIO
ColdFire	NXP MCF520x: MCF5208	NXP M5208EVB and M5208EVBe Evaluation Boards		BDM		BSD, lwIP, IPv6		NOR
ColdFire	NXP MCF521x: MCF5213	NXP M5213EVB Evaluation Board		BDM				NOR						CAN	Free eCosPro Starter Kit available for registered owners of the board, upgradeable to eCosPro Developer's Kit. ecoflash support for installing flash images. The CAN driver package requires an add-on middleware license.
ColdFire	NXP MCF527x: MCF5272	NXP M5272C3 Evaluation Board		BDM, RedBoot		BSD, lwIP, IPv6		NOR
ColdFire	NXP MCF528x: MCF5282	M5282EVB Evaluation Board		BDM, RedBoot		BSD, lwIP, IPv6		NOR						CAN	On-chip and off-chip flash both supported. The CAN driver package requires an add-on middleware license.
ColdFire	NXP MCF528x: MCF5282	M5282LITE Evaluation Board		BDM, RedBoot		BSD, lwIP, IPv6		NOR						CAN	On-chip and off-chip flash both supported. The CAN driver package requires an add-on middleware license.
ColdFire	NXP MCF528x: MCF5280	SSV DIL/NetPC DNP/5280 eCos Starter Kit		BDM, RedBoot		BSD, lwIP, IPv6		NOR						CAN	Board bundled with eCosPro Starter Kit which can be upgraded to eCosPro Developer's Kit. The CAN driver package requires an add-on middleware license.
ColdFire	NXP MCF528x: MCF5282	SSV DIL/NetPC DNP/5282 on DNP/EVA6 Evaluation Board		BDM, RedBoot		BSD, lwIP, IPv6		NOR						CAN	On-chip and off-chip flash both supported. The CAN driver package requires an add-on middleware license.
ColdFire	NXP MCF532x: MCF5329	senTec Cobra5329 Module and Carrier Board		BDM, RedBoot	device	BSD, lwIP, IPv6		NOR						CAN	ecoflash support for writing flash images. The USB and CAN driver packages require add-on middleware licenses.
H8S	Renesas H8S/22xx: H8S/2218, H8S/2212	H8S Simulator		RedBoot											Only 32bit versions of CPU supported. Current h/w ports limited to private customer boards
H8	Renesas H8/300H	H8/300 Simulator		RedBoot											Only 32bit versions of CPU supported. Current h/w ports limited to private customer boards
MIPS	MIPS32: 14Kc, 14K with microMIPS ISA support	MIPS SEAD-3 LX110 and LX50 Development Boards		JTAG, RedBoot		BSD, lwIP, IPv6		NOR							Dual ISA support includes configuration options to enable mixing of MIPS32 and microMIPS ISA's in both system and application code. Both little-endian and big endian modes of operation are also supported. Multicasting and IPv6 currently not supported.
MIPS	MIPS32: 4Kc; MIPS64: 5Kc	MIPS Atlas Development Board		JTAG, RedBoot		BSD, lwIP		NOR						PCI
MIPS	MIPS32: 4Kc, 4Kec; MIPS64: 5Kc	MIPS Malta Development Board		JTAG, RedBoot		BSD, lwIP		NOR						PCI
MIPS	NXP PNX83xx: PNX8310	NXP STB200 STB Reference Design		JTAG, RedBoot		BSD, lwIP, IPv6		NOR							Free eCosPro Starter Kit available to STB200 registered users. Includes USB host stack.
MIPS	NXP PNX83xx: PNX8330	NXP STB220 STB Reference Design		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						IDE	Free eCosPro Starter Kit available to STB220 registered users. Includes MMFS fs & USB host and device stacks.
NIOS II	Altera Cyclone II FPGA	Altera Nios II Development Kit Cyclone II FPGA Edition (2C35)		JTAG, RedBoot		BSD, lwIP, IPv6*		NOR							Triple-speed Ethernet driver included. * Multicasting and IPv6 are supported for the on-board lan91c111 Ethernet driver, but not currently for Altera triple-speed Ethernet driver.
NIOS II	Altera Cyclone III FPGA	Nios II Embedded Evaluation Kit, Cyclone III Edition (NEEK)		JTAG, RedBoot		BSD, lwIP		NOR							Triple-speed Ethernet driver included. Multicasting and IPv6 currently not supported for triple-speed Ethernet driver.
NIOS II	Altera Stratix II FPGA	Altera Nios II Development Kit Stratix II FPGA Edition (2S60)		JTAG, RedBoot		BSD, lwIP		NOR							Triple-speed Ethernet driver included. * Multicasting and IPv6 are supported for the on-board lan91c111 Ethernet driver, but not currently for Altera triple-speed Ethernet driver.
PowerPC	NXP MPC5121e	NXP ADS512101 Advanced Development System		JTAG, RedBoot		BSD, IPv6		NOR						CAN, GPIO, IDE, SPI-slave	SPI and UART support on this board are mutually exclusive. JTAG programmer required for RedBoot firmware installation. The CAN driver package requires an add-on middleware license.
PowerPC	NXP MPC55xx: MPC5554	NXP MPC5554EVB Evaluation Kit (AKA MPC55554DEMO)		JTAG, RedBoot				NOR
PowerPC	NXP MPC82xx: MPC8245	Ampro EnCore PP1 module and board		JTAG, RedBoot		BSD, lwIP		NOR							ENQUIRE FOR AVAILABILITY
PowerPC	NXP MPC830x: MPC8309	NXP MPC830xKIT Processor Evaluation Kit		JTAG, RedBoot		BSD, lwIP		NOR						GPIO
PowerPC	NXP MPC8xx: MPC852T	Analogue & Micro Adder II Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
PowerPC	NXP MPC8xx: MPC850	Analogue & Micro Adder I Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
RISC-V 32	Expressif ESP32-C3	Beetle ESP32 - C3 (RISC-V Core Development Board)		JTAG				NOR							ENQUIRE FOR AVAILABILITY
RISC-V 32	SiFive RISC-V E24 Core			JTAG, RedBoot											ENQUIRE FOR AVAILABILITY
RISC-V 32	SiFive RISC-V RV32IMACFC	Pine64 PineCone		JTAG, RedBoot											ENQUIRE FOR AVAILABILITY
RISC-V 32	QEMU RISC-V RV32I	QEMU x86-64		QEMU, RedBoot		BSD, lwIP, IPv6									VirtIO, RPMSG and macrocell based IOENQUIRE FOR AVAILABILITY
RISC-V 64	QEMU RISC-V RV64E	QEMU x86-64		QEMU, RedBoot		BSD, lwIP, IPv6									VirtIO, RPMSG and macrocell based IO. SMP to 4 cores. ENQUIRE FOR AVAILABILITY
SuperH	Renesas SH4A: SH7780	SDK7780 Development Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						PCI
SuperH	Renesas SH4: SH4-200	SuperH SH4-202 MicroDev Board		JTAG, RedBoot		BSD, lwIP, IPv6		NOR
SuperH	ST ST40: ST40RA166XH	ST ST40RA166 Evaluation Platform		JTAG, RedBoot		BSD, lwIP, IPv6		NOR						PCI	Free eCosPro Starter Kit available to ST40RA166 board registered users
Tilera	TILE-Gx	TILE-Gx evaluation boards		LittleBoPeep											Includes port of a subset of the Tilera Multicore Components (TMC) Library. Kit only supports Linux hosts, does not include Eclipse IDE and requires the use of the Tilera MDE Tile Tools.
x86	Intel/AMD x86-32	Generic PC and PC/104 boards		RedBoot		BSD, lwIP, IPv6								framebuffer, PCI, NXP SJA1000 CAN, SMP support on some h/w	Ethernet: Intel i82559, i82544; AMD Lance; NS DP83816; Realtek RTL8139. VMware, Bochs Emulator and QEMU can also be used as target. VMware port does not support IPv6. Profiling system shares system timer. The CAN driver package requires an add-on middleware license.
x86	Intel/AMD x86-32	Linux x86 Synthetic Target		direct		BSD, lwIP, IPv6		NOR, NAND						framebuffer, ADC	Synthetic NAND driver includes bad block injection option

<< Expand table

In addition to the drivers and features listed above, all ports include hardware support for system interrupt controller, hardware timer, cache (where applicable) and RAM initialisation.

All NOR flash drivers conform to v2 of the flash API. NOR flash drivers are required for JFFS2 Journalling Flash File System 2 support. NAND flash drivers are required to support the Yaffs NAND file system. USB host controller, MMC/SD or IDE drivers are a prerequisite for FATfs support.

Driver support indicated in above table is either for the specific processor or discrete hardware on the specific evaluation board. Any given evaluation board may not include the necessary hardware to support all processor specific drivers.

eCosPro Developer's Kit releases can be developed on-demand for other development boards, or for your own custom hardware - with your specific device driver and functionality requirements incorporated. Please contact us to discuss your requirements.